JMA M-BT remote control

IT
EN
FR
DE

+39 0435 542 500

info@errebispa.com

M-BT Remote

THE MOST COMPLETE REMOTE CONTROL WITH THE LATEST MOBILE TECHNOLOGY

It can create and copy remotes of 280-400MHz (Extra EU), 433MHz, 868MHz, both fix code and Rolling Codes. You can do it by self-learning, by dedicated App for your mobile, or by the PC program ERREBIREMOTESPRO.

SELF-LEARNING COPY

Copying in few easy steps, as indicated on the back of the leaflet, with no need for any device.

COPY OR GENERATION BY MOBILE APP

ErrebiRemotesPro App is available on Play store and App store. It will help you for the copy, and it gives the possibility to manage the advanced functions the remote gets.

COPY OR GENERATION BY PC PROGRAM

PC program permits you to use all the advanced functions of the M-BT, like the generation of a remote, and the copy of a FAAC slave.

THE ROLLING CODE REMOTES THAT CAN COPY

It copies 95% of fixed codes in the market

Play

The tutorial video below can be used to copy fixed code remote controls

1.Press buttons 1 and 2 at the same time, until led starts blinking red.

2.Release the buttons and the led will switch off.

3.Press the button on the Errebi remote control over which you want to copy the original remote control.

4.The red Led will remain on.

5.Point the two remot controls at one another and hold the button on the original remote control until the M-BT turns green.

6.The led will switch off.

7.Copy Complete

READ MORE

Play

This tutorial video can be used to copy the following remote controls:

ADYX, Allmatic, Aprimatic TR, Aprimatic TXM (No Perso), Beninca, Came Ato, Cardin S435, Cardin S449, Celinsa, Chamberlain, Crawford, Ditec, Doorhan, Ecostar, Extel, Europe Automatisme, Faac RC Stagnli, Fadini, Genius, Gibidi, JCM 2ºGen, King Gates, Lift Master, Mhouse, Motorline, Nice Flor (No Perso), Normstahl, Novoferm, Rolltore TP2E(No perso), Seav, Prastel TP2E (No perso), Pujol Vario, Somfy Keytis, Siminor, Sommer, Skymaster

1.Press buttons 1 and 2 at the same time, until led starts blinking red.

2.Release the buttons and the led will switch off.

3.Press the button on the Errebi remote control over which you want to copy the original remote control.

4.The red Led will remain on.

5.Point the two remote controls at one another and hold the button on the original remote control until the M-BT turns green.

6.After a few seconds, the led will flash slowly.

7.There are 4 copy options

a.AUTOMATIC (recommended) : Press button 1

b.Manual : Press button 2 and enter the number to add or subtract to the serial code  Button 3 :Hundreds; Button 2: Tens; Button 1: Units Button 4: Add/Subtract Alternate; Back Button: Exit  Example code entered:421

c.Clone: Press button 3

d.Scanner: Press button 4.

8.The led will switch off.

9.To finalize, follow the steps of the manufacturer to register the remote control.

NOTE: If Clone mode was selected remotes don’t need to be registered. DITEC will work OK but the remaining ones need to be synchronized with the original one.

10. Copy Complete

READ MORE

Play

This tutorial video can be used to copy the following remote controls:

AERF, AVIDSEN, JCM, MUTANCODE, ROPER, TELCOMA FM402, V2, VDS

1.Press buttons 1 and 2 at the same time, until led starts blinking red.

2.Release the buttons and the led will switch off.

3.Press the button on the Errebi remote control over which you want to copy the original remote control.

4.The red Led will remain on.

5.Point the two remote controls at one another and hold the button on the original remote control until the M-BT turns green.

6.After a few seconds, the led will turn red again (It’s necessary the second input).

7.Press the same button of original remote.

8.After a few seconds, the led will flash slowly.

9.There are 4 copy options

a.AUTOMATIC (recommended) : Press button 1

b.Manual : Press button 2 and enter the number to add or subtract to the serial code  Button 3 :Hundreds; Button 2: Tens; Button 1: Units Button 4: Add/Subtract Alternate; Back Button: Exit  Example code entered:421

c.Clone: Press button 3

d.Scanner: Press button 4.

10.The led will switch off.

11.To finalize, follow the steps of the manufacturer to register the remote control.

NOTE: If Clone mode was selected remotes don’t need to be registered. DITEC will work OK but the remaining ones need to be synchronized with the original one.

12.Copy Complete

READ MORE

Play

This tutorial video can be used to copy the following remote controls:

BFT Mitto

1.Press buttons 1 and 2 at the same time, until led starts blinking red.

2.Release the buttons and the led will switch off.

3.Press the button on the Errebi remote control over which you want to copy the original remote control.

4.The red Led will remain on.

5.Point the two remote controls at one another and hold the button on the original remote control until the M-BT turns green.

6.After a few seconds, the led will turn red again (It’s necessary the second input).

7.Press the hidden button in the rear of the BFT, or press at the same time 1 and 2 buttons of the original until de led turns to green.

8.After a few seconds, the led will flash slowly.

9.There are 4 copy options

a.AUTOMATIC (recommended) : Press button 1

b.Manual : Press button 2 and enter the number to add or subtract to the serial code  Button 3 :Hundreds; Button 2: Tens; Button 1: Units Button 4: Add/Subtract Alternate; Back Button: Exit  Example code entered:421

c.Clone: Press button 3

d.Scanner: Press button 4.

10.The led will switch off.

11.To finalize, follow the steps of the manufacturer to register the remote control.

NOTE: If Clone mode was selected, the remote does not need to be registered but need to be synchronized with the original one.

12.Copy Complete

READ MORE

Play

This tutorial video can be used to copy the following remote controls:

Genius AMIGO/AMIGOLD/KILO and Faac SLH (only master)

1.Press buttons 1 and 2 at the same time, until led starts blinking red.

2.Release the buttons and the led will switch off.

3.Press the button on the Errebi remote control over which you want to copy the original remote control.

4.The red Led will remain on.

5.Point the two remote controls at one another and hold the button on the original remote control until the M-BT turns green.

6.After a few seconds, the led will turn red again (It’s necessary the second input).

7.Far from the Errebi remote, Press at the same time buttons 1 and 2 of the original, until the led of the original blinks.

8.Release the buttons and press again the button used for the first input.

9.The led will switch off.

10.Copy Complete

*The video we have already recorded for Faac Slave

READ MORE

This website uses its own cookies and cookies from third parties in order to optimise your browsing experience, better meet your needs, and perform analytical tasks. By continuing to browse you accept our Cookies Policy.ACCEPT